Beatbot AquaSense 2 Ultra Battery Runtime and Charge Time
Looking at the Beatbot AquaSense 2 Ultra?
Check current Amazon availability →
As an Amazon Associate I earn from qualifying purchases.
Check current Amazon availability →
As an Amazon Associate I earn from qualifying purchases.
Short answer: Beatbot publishes up to 10 hours of continuous surface cleaning, up to 5 hours of floor cleaning, and roughly 4.5–5 hours for walls and waterline depending on the current manufacturer page. A full recharge takes about 4.5 hours.
Published Runtime by Cleaning Job
| Mode | Published maximum |
|---|---|
| Surface cleaning | Up to 10 hours |
| Floor cleaning | Up to 5 hours |
| Walls + waterline | About 4.5–5 hours |
| Full recharge | About 4.5 hours |
The robot uses a 13,400mAh lithium-ion battery.
Why the Runtime Changes by Mode
Surface skimming, floor movement and wall climbing put different demands on motors and navigation. That is why a single “battery lasts X hours” number does not tell the whole story.
Can It Cover a Large Pool in One Charge?
Beatbot markets the AquaSense 2 Ultra for large residential pools and lists coverage in the roughly 3,400–3,875 sq ft range depending on the product/support page and mode. If your pool is unusually large or especially complex, more than one cycle may still be required.
More AquaSense 2 Ultra Questions
Still considering the Beatbot AquaSense 2 Ultra?
See current Amazon listings →
See current Amazon listings →